The BWT200 series enamels for exterior protect wood from the atmospheric agents. Extremely covering, they give wood a special, satin effect. The special pigments used are resistant to the yellowing and fading effect of light, and ensure colour brightness over time. The enamels are also suitable for application to furniture and furnishings for interiors.

Capacity

BWT200 series waterborne enamels for exterior have a capacity of 8m2 per can of 0,75l and of 25m2 per can of 2,5l.

Tools

They are applicable with synthetic bristle brush and spray gun, to be washed with water after use.

Instructions

Raw Wood:

  • Sand with 150 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • Apply the glaze to white, ivory, light gray and blue sky impregnating white BWI200.
  • Apply the glaze to spruce green, forest green , mocha and dark brown to colorless impregnating BWI100.
  • After 4 hours , then apply a first coat of nail polish.
  • Sand with 220 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • For better protection of the surface, after 4 hours , apply a second coat of polish.

Varnished wood :

  • If in good condition , clean with mild detergent.
  • If there are any slight imperfections , sand with 220 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • Apply one coat of polish.
  • If damaged grit sandpaper with a 80/120 to remove the paint before proceeding as for the raw wood.

Colors