The BWT100 series Clear, acrylic, waterborne top-coats for exteriors protect wood from atmospheric agent. Thanks to the top-coats, the surface remains unaltered, with no coat peeling. They give the wood a particular satin effect.

Capacity

BWT100 series Waterborne top-coats fot exterior have a capacity of 8m2 per can of 0,75l and of 25m2 per can of 2,5l.

Tools

They are applicable with synthetic bristle brush and spray gun, to be washed with water after use.

Instructions

Raw wood:

  • Sand with 150 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • Apply the primer series BWI100 in the desired shade.
  • After 4 hours, apply a first coat of finish.
  • Sand with 220 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • For better surface protection, after 4 hours, apply a second coat of finish.

Varnished wood:

  • If in good condition, clean with mild detergent.
  • If there are any slight imperfections, sand with 220 grit paper.
  • Clean the surface with a cloth to remove any sanding residue.
  • Apply one coat of finish.
  • If damaged, grit sandpaper with a 80/120 to remove the paint before proceeding as for wood raw

Colors